| Customization: | Available |
|---|---|
| Automatic Grade: | Automatic |
| Driven Type: | Electric |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The stacking machine (swing arm type) is a special model for the vacuum sputtering process in the wafer industry. Its main function is to divide the ceramic substrate into strips and discharge them into the stacking jig, which can save manpower and improve work efficiency. Currently, it is used in chip resistors The industry has begun to promote its use.
| Specifications of stacker (swing arm type) | |||
| Function |
specification |
Function confirmation | Remark |
| Applicable product types |
01005 0201 | Optional | |
| Applicable substrate |
Width 28*_______ 70*60 Others______ | Optional | |
| power supply |
1 P220V/1ø3w/50Hz (can be customized) | ||
| air pressure |
5kg/cm² or more (saturated pressure) | ||
| Operation interface | touchscreen |
||
| stacking speed |
4 0 items (net feeding speed) / min |
||
| Yield | More than 96% ( except for substrate dark cracks ) | ||
| Utilization rate | 85% | ||
| Jig frame size |
43*66*11 65*85*12 43*70*11 43*92*11 73*89*11 73*90*11 | Optional | |
| Number of stacked fixtures placed |
10~15 PCS (subject to actual situation) |
||
| Fixture switching time | 20 seconds | ||
| Appearance size | Length 1080 x Width 550 x height 1800 (mm) ( subject to the actual object ) | ||
| weight | About 200kg | ||
| color | Blue ( or customer specified ) | ||
| other | |||
| Stacking machine (swing arm type) function description | |||
| Function | illustrate | Function confirmation | Remark |
| Feeding |
Single bin clamp automatic feeding |
||
| Stacking material separation |
The substrate is sucked and blown at the same time to prevent overlapping supply problems. |
||
| Substrate feeding |
Use the clamping claws to clamp the end of the substrate ; push it to the folding strip |
||
| fold strip |
Simulate human manual work, use upper and lower press dies to clamp the first strip of material, and the swing arm swings the tail end base plate up and down to separate the strips. | ||
| Material strip implantation |
Take out the folded material strip ; after sucking it up with the vacuum suction tube, insert it directly into the jig. | ||
| entrance |
|
||
| Fixture is sent into positioning |
|
||
| Fixture launch |
Push out the stacked jig and continue stacking the next jig | ||
| baffle lift | Control the lifting and lowering of the inner baffle of the fixture ( determine whether there is material falling or no material rising ) |
||
| Software function |
|
Optional | |
){kind=link}