Resistor, Capacitor and Inductor Production Equipment Swing Arm Stacker

• Customization: Available
• Automatic Grade: Automatic
• Driven Type: Electric
• Model NO.: R-BB50
• Speed: High Speed
• Stacking Speed: 4 0 Items (Net Feeding Speed) / Min
• Yield: More Than 96%
• Utilization Rate: 85%
• Number of Stacked Fixtures Placed: 10~15 PCS
• Fixture Switching Time: 20 Seconds
• Transport Package: Vacuum Bag + Wooden Box
• Specification: Length 1080 x Width 550 x height 1800 (mm)
• Trademark: HOPO
• Origin: China
• Package Size: 1080.00cm * 550.00cm * 1800.00cm
• Package Gross Weight: 200.000kg

Product Description

Product Description

illustrate:

1. .The stacking machine (swing arm type) is a special model for the vacuum sputtering process in the wafer industry. Its main function is to divide the ceramic substrate into strips and discharge them into the stacking jig, which can save manpower and improve work efficiency. Currently, it is used in chip resistors The industry has begun to promote its use.

Product Parameters

Specifications of stacker (swing arm type)
Function	specification	Function confirmation	Remark
Applicable product types	01005 0201		Optional
Applicable substrate	Width 28*_______ 70*60 Others______		Optional
power supply	1 P220V/1ø3w/50Hz (can be customized)
air pressure	5kg/c or more (saturated pressure)
Operation interface	touchscreen
stacking speed	4 0 items (net feeding speed) / min
Yield	More than 96% ( except for substrate dark cracks )
Utilization rate	85%
Jig frame size	43*66*11 65*85*12 43*70*11 43*92*11 73*89*11 73*90*11		Optional
Number of stacked fixtures placed	10~15 PCS (subject to actual situation)
Fixture switching time	20 seconds
Appearance size	Length 1080 x Width 550 x height 1800 (mm) ( subject to the actual object )
weight	About 200kg
color	Blue ( or customer specified )
other

 

Stacking machine (swing arm type) function description
Function	illustrate	Function confirmation	Remark
Feeding	Single bin clamp automatic feeding
Stacking material separation	The substrate is sucked and blown at the same time to prevent overlapping supply problems.
Substrate feeding	Use the clamping claws to clamp the end of the substrate ; push it to the folding strip
fold strip	Simulate human manual work, use upper and lower press dies to clamp the first strip of material, and the swing arm swings the tail end base plate up and down to separate the strips.
Material strip implantation	Take out the folded material strip ; after sucking it up with the vacuum suction tube, insert it directly into the jig.
entrance	Guide material strip Check whether there is material strip
Fixture is sent into positioning	Jig feeding entrance lateral pressure
Fixture launch	Push out the stacked jig and continue stacking the next jig
baffle lift	Control the lifting and lowering of the inner baffle of the fixture ( determine whether there is material falling or no material rising )
Software function	You can see the quantity of input materials . You can see the number of substrates . Manual automatic function Tool and fixture switching function With various fault alarm functions With various parameter setting functions  All speed control parameters can be set on the human-machine interface  Other production demand functions  Scan code function Connect to MES system interface (Ethernet /USB/235 interface)		Optional

Detailed Photos